The Devilbiss ProAIR-2 is the industry favourite for fitting in an automotive refinish spray booth, providing clean breathable air for air fed safety equipment. Triple filtration removes dirt and other contaminants down to 0.01 microns through the coalescing filter, while the capacity of 32 cfm provides sufficient air flow to run an air fed mask and spray gun. Suitable for use in low bake spray booths (up to 80˚C).
This regulator has been designed to receive air at main line pressure and to deliver it at a desired lower regulated pressure. High air flows for conventional and compliant spray guns. l Rolling diaphragm for rapid response and precision control. l Optional filter specifications for spraying and air fed respiratory protection outfits.
- Tough, heavy duty construction for long service life
- Multi-valved outlets for spray gun and air fed respiratory protection plus semi-automatic filter drains
- Tamper proof, removable and lockable adjustment knobs
SPECIFICATIONS
Air Inlet Thread:
| 1/2" BSP female
|
Regulated Outlets:
| 2 Valved
|
Air Outlets (Ball Valves):
| 1/4" BSP (M)
|
Width (Overall):
| 330mm (12.9")
|
Height (Overall):
| 280mm (11")
|
Weight:
| 3375 g (119 oz)
|
Maximum Air Flow Capacity:
| 900 l/min (32 cfm)
|
Maximum Air Inlet Pressure:
| 13 bar (189 psi)
|
Maximum Regulated Outlet Pressure:
| 0-8 bar (0-116 psi)
|
Maximum Operating Temperature:
| 80°C (176°F)
|
Pressure Gauge:
| 0-11 bar (0-160 psi) Gauge Port: 1/8” BSP (F)
|
Degree of Filtration (Output air quality class ISO8573-1):
| 1.7.2 (Down to 0.01 microns)
|
Drain Valve:
| Semi-Automatic
|
Maximum Pressure Drop:
| 10% of Inlet Pressure |
| Downloads: | Product Information Sheet |
| Part number: | PROAIR-2 |
Please note that the best effort has been made to keep the stock levels accurate. If the stock level is quite low for this product, we recommend calling us on 1300 BC COAT (222 628) to confirm if this item is in stock before purchasing. Please note that if the item is on special or is a Mirka product, the stock levels are checked frequently.
Delivery to Sydney metro areas are very frequent and are usually delivered within 2 days. If you are located anywhere else in Australia, it may take between 2-8 days providing the item is in stock.
If 'Preorder' is showing, this means that this product is ordered in as your order is placed, or we have run out of stock and will order the product in for you. Call us on 1300 BC COAT (222 628) to check.
Devilbiss Advance HD HVLP &...