The Festool CTM 36L M Class EI Dust Extractor guarantees efficient dust and chip extraction, extremely important for sawing, sanding or routing work on site or in the workshop. Clever flat filter design maximises the volume of dust that can be held while maintaining high suction power.
Suction power is adjustable and the switch on/shut off function allows the extractor to turn on automatically when required and turn off when not.
Approved for dust class M, and with the option of fitting air modules, Festool's CTM 36 promises healthy, dust free working conditions at every job.
Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded.
Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset.
When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required.
When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn’t matched to the application. (e.g.: saw blade not matched to material)
MAIN APPLICATIONS
For dust with limit values > 0.1 mg/m³
Flexible and clean in the workshop and on-site thanks to compact design
Integral automatic electronic switch-on/shut-off for extraction from electric power tools
Suitable for both wet and dry extraction
SPECIFICATIONS
| Applications: | - Workshop and on site cleaning
- Automatic operation with power tools
- Wet and dry extraction
- Work centre and Systainer transport
|
Maximum Airflow:
| 3,900 l/min
|
Maximum Vacuum:
| 24,000 Pa
|
Filter Surface Area:
| 6,318 cm2
|
Container/Filter Bag Capacity:
| 36 L / 34 L
|
Power Consumption:
| 350 - 1200 W
|
Dust Approval Rating:
| Dust Class M - medium risk dust such as mineral and wood dust
|
Mains Cable:
| Rubber Insulated
|
Mains Cable Length:
| 7.5 m
|
| Maximum Wattage of Connected Tool (W) | 1200w |
Dimensions - L x W x H:
| 630 mm x 365 mm x 596 mm
|
Weight:
| 14.4 kg |
Please note that the best effort has been made to keep the stock levels accurate. If the stock level is quite low for this product, we recommend calling us on 1300 BC COAT (222 628) to confirm if this item is in stock before purchasing. Please note that if the item is on special or is a Mirka product, the stock levels are checked frequently.
Delivery to Sydney metro areas are very frequent and are usually delivered within 2 days. If you are located anywhere else in Australia, it may take between 2-8 days providing the item is in stock.
If 'Preorder' is showing, this means that this product is ordered in as your order is placed, or we have run out of stock and will order the product in for you. Call us on 1300 BC COAT (222 628) to check.
