1300 BCCOAT (222 628)
We develop, manufacture & supply quality surface coatings.

Devilbiss GTI Pro Lite Pressure Spray Gun Head

In Stock

Regular price $840.40 | Save $-840.40 (Liquid error (sections/product-template line 230): divided by 0% off)

Tax included. Shipping calculated at checkout.
Hurry, Only 6 left!

Estimated delivery between and . We will call you as soon as possible if there are any delays with your order.


Designed with both high volume, low pressure (HVLP) technology which reduces overspray and limits air cap pressure to 0.7 bar (10 psi). Trans-Tech complies with EPA by obtaining transfer efficiency above 65%.

The superior performance is achieved with new and improved design technology utilising free breathing high capacity air passages and a coaxial linear air valve to provide unrestricted and even flow of compressed air through the spray gun body.

This smooth air movement enables the precision-engineered air caps and fluid tips to produce superior atomisation with consistent droplet distribution throughout the spray pattern.

  • HVLP & Trans Tech (Compliant) Air Caps for choice of Transfer Efficiency, Atomisation power and Application requirements
  • Extensive range of stainless steel, hardened and tungsten carbide fluid tips and needles
  • Coaxial trigger air valve design for improved air flow
  • Fully Environmental Legislation Compliant with high transfer efficiency resulting in significant paint savings
  • Air adjuster valve provides instant pressure adjustment
Gun Head Weight: 
Max Air Inlet Pressure (P1): 
12 bar (175 psi)
Max Fluid Inlet pressure (P2): 
15 bar (217 psi)
Gun Air Inlet Pressure for HVLP and High Efficiency with gun triggered: 
1.75 bar (25.4 psi), 2.00 bar (29.0 psi)
Gun Body: 
Anodised Aluminium
Fluid Nozzle, Fluid Needle, Fluid Inlet, Trigger Stud, Adjusting Knobs, Air Cap Retaining Ring, Anodized aluminium Springs, Clips, Screws: 
Stainless steel
Seals, Gaskets Solvent resistant Trigger: 
Chrome plated steel
Air Inlet, Body Bushing, Spreader & Cheater Valve Bodies, Air Valve Nut & Air Valve Housing: 
Chrome plated brass
Air Valve Spindle, Air Cap: Nickel plated brass Cup, Lid, Tube & Cam: 
  • GTI PRO LITE Spray Gun
  • Set of 4 coloured identification rings
  • Spanner (10mm and 14mm A/F)
  • Torx/Flat blade screwdriver
  • Cleaning Brush
  • Service bulletin
These guns are not designed for use with highly corrosive and/or abrasive materials

Manual & Spare Parts List

Air Cap & Fluid Tip Selection Guide



Please note that deliveries cannot be made to PO Boxes.

Please note that the best effort has been made to keep the stock levels accurate. If the stock level is quite low for this product, we recommend calling us on 1300 BC COAT (222 628) to confirm if this item is in stock before purchasing. Please note that if the item is on special or is a Mirka product, the stock levels are checked frequently.

Delivery to Sydney metro areas are very frequent and are usually delivered within 2 days. If you are located anywhere else in Australia, it may take between 2-8 days providing the item is in stock.

If 'Preorder' is showing, this means that this product is ordered in as your order is placed, or we have run out of stock and will order the product in for you. Call us on 1300 BC COAT (222 628) to check.

Devilbiss GTI Pro Lite Pressure Spray Gun Head


BC Coatings can deliver to just about anywhere in Australia. Stock items are delivered as soon as possible (usually by the next day) to Metro Sydney areas.
Colours and products that have to be made have a 24 hour turnaround to be completed, it will then be shipped once it has been made. Every effort has been made to keep stock levels on the website accurate to ensure you receive your items in a timely manner.


All return of goods must have prior authorisation. Goods which have been incorrectly supplied by BC Coatings will be accepted back for a full credit provided the error is reported to BC Coatings within 7 days of receipt of goods.

Where a customer wishes to return stocked items for any reason other than incorrect supply, the following requirements must be established before a return is authorised.

  1. Saleability
  2. Age of goods
  3. Condition of goods and packaging

Goods that are past their used by date, or in an unsaleable condition will be unable to be returned.

Please contact us on 1300 BCCOAT (222 628) before returning anything to us.

Recently Viewed Products

What are you looking for?


Keep up to date with new products, our latest specials and more!

* indicates required
Choose your industry
Where are you located?

Your cart