The Devilbiss GTI Pro Lite Suction Spray Gun & Pot is designed with both high volume, low pressure (HVLP) technology which reduces overspray and limits air cap pressure to 0.7 bar (10 psi).
Trans-Tech complies with EPA by obtaining transfer efficiency above 65%. The superior performance is achieved with improved design technology utilising free breathing high capacity air passages and a coaxial linear air valve to provide unrestricted, even flow of compressed air through the body.
This smooth air movement enables the precision-engineered air caps and fluid tips to produce superior atomisation with consistent droplet distribution throughout the spray pattern.
- Air Caps for choice of Transfer Efficiency, Atomisation power and Application requirements
- Extensive range of stainless steel, hardened and tungsten carbide fluid tips and needles
- Coaxial trigger air valve design for improved air flow
- Fully Environmental Legislation Compliant with high transfer efficiency resulting in significant paint savings
- Air adjuster valve provides instant pressure adjustment
SPECIFICATIONS
Gun Head Weight:
| 500 g
|
Max Air Inlet Pressure (P1):
| 12 bar (175 psi)
|
Max Fluid Inlet pressure (P2):
| 15 bar (217 psi)
|
Gun Air Inlet Pressure for HVLP and High Efficiency® with gun triggered:
| 1.75 bar (25.4 psi) 2.00 bar (29.0 psi)
|
Gun Body:
| Anodised Aluminium
|
Fluid Nozzle, Fluid Needle, Fluid Inlet, Trigger Stud, Adjusting Knobs, Air Cap Retaining Ring, Anodized aluminium Springs, Clips, Screws:
| Stainless steel
|
Seals, Gaskets Solvent resistant Trigger:
| Chrome plated steel
|
Air Inlet, Body Bushing, Spreader & Cheater Valve Bodies, Air Valve Nut & Air Valve Housing:
| Chrome plated brass
|
Air Valve Spindle, Air Cap:
| Nickel plated brass
|
Cup, Lid, Tube & Cam:
| Aluminium
|
Includes:
| - GTI Pro Litre Suction Spray Gun
- KR 1 litre Suction Feed Cup
- Set of 4 coloured identification rings
- Cup Filter
- Spanner (10 mm and 14 mm A/F)
- Torx / Flat blade screwdriver
- Cleaning Brush
- Service bulletin
|
Downloads: | Manual & Spare Parts List Air Cap & Fluid Tip Selection Guide |
Part Number: | PROLT-STE10-16 |
Please note that the best effort has been made to keep the stock levels accurate. If the stock level is quite low for this product, we recommend calling us on 1300 BC COAT (222 628) to confirm if this item is in stock before purchasing. Please note that if the item is on special or is a Mirka product, the stock levels are checked frequently.
Delivery to Sydney metro areas are very frequent and are usually delivered within 2 days. If you are located anywhere else in Australia, it may take between 2-8 days providing the item is in stock.
If 'Preorder' is showing, this means that this product is ordered in as your order is placed, or we have run out of stock and will order the product in for you. Call us on 1300 BC COAT (222 628) to check.